How to Care for Anthurium Warocqueanum: Expert Guide

Disclosure: As Amazon Associates we earn from qualifying purchases. When you buy through links on our site, we may earn an affiliate commission at no additional cost to you.

Please note that while we always strive to provide 100% up to date and accurate information, there is always the small possibility of error. Therefore, we advise conducting further research and due diligence before consuming any plants or exposing pets to anything mentioned on this site. Kindly refer to the full disclaimer for more details here.

Anthurium warocqueanum, also known as Queen Anthurium, is a stunning tropical plant known for its large, dark green velvety leaves. As an eye-catching addition to any indoor or outdoor garden, this beautiful species requires proper care and attention to thrive in different environments.

Caring for an Anthurium warocqueanum involves providing the right balance of light, temperature, humidity, and soil conditions. This tropical beauty prefers bright indirect sunlight, which contributes to its healthy growth without causing leaf damage. Maintaining a balanced and stable environment is crucial, with temperatures ranging from 68-86°F (20-30°C) and humidity levels of 70% or more for optimal growth.

In addition to these factors, choosing the appropriate soil mix is essential for Queen Anthurium care. Well-draining potting soil enriched with sphagnum moss, perlite, orchid bark, charcoal, and peat moss ensures that the plant’s roots receive sufficient nutrients and aeration. Regular watering, typically once a week, helps keep the soil moist without becoming waterlogged. By following these guidelines, you can cultivate a thriving Anthurium warocqueanum and enjoy its captivating beauty in your living space.

Anthurium Warocqueanum Overview

Anthurium Warocqueanum, commonly known as the Queen Anthurium, is a stunning tropical plant native to the dense rainforests of Colombia. Known for its large, velvety, and dark green leaves, this exotic plant is an excellent addition to any indoor space. However, providing the right care for your Anthurium Warocqueanum is essential to ensure its healthy growth.

Light Requirements: To mimic its natural habitat, the Queen Anthurium thrives in medium to bright, indirect sunlight. Make sure not to expose the plant to direct sunlight, as it can scorch the leaves.

Watering: One of the most challenging aspects of Anthurium Warocqueanum care is watering. It is essential to find the balance between keeping the plant moist and avoiding over-watering, as too much water can lead to root rot. It’s best to water your plant once a week on average.

Humidity: High humidity is crucial for the well-being of this tropical plant. Aim for 70% humidity or more to provide optimal conditions. You can increase humidity through various methods such as a tray or humidifier may be used to increase humidity levels with water the plant in close proximity.

Temperature: Anthurium Warocqueanum prefers temperatures between 68-86°F (20-30°C). Ensure that you protect it from cooler temperatures and drafts, which can cause damage to the leaves.

Soil: A well-draining potting mix is necessary for Anthurium Warocqueanum. Consider using a mix that contains perlite, orchid bark, charcoal, and peat moss to ensure proper drainage.

Fertilizer: It’s essential to provide your Queen Anthurium with nutrients in the form of fertilizer. Feed your plant with a balanced, water-soluble fertilizer once a month during the growing season, but reduce or stop fertilizing during the colder months.

Propagation: To propagate your Anthurium Warocqueanum, you can use stem cuttings or division. Always make sure to use sterile tools to avoid possible infections.

By considering and addressing these key factors, you are well on your way to ensuring the healthy growth of your Anthurium Warocqueanum. Keep in mind that consistency and monitoring are also crucial aspects of plant care, so adapt your routine as needed to provide the best conditions for your tropical beauty.

Optimal Growing Conditions

Light Requirements

Anthurium warocqueanum, also known as Queen Anthurium, thrives in bright indirect sunlight. Direct exposure to sunlight can harm the plant’s delicate leaves. If you’re growing this plant indoors, place it near a window that gets plenty of diffused light. For outdoor growing, ensure the plant is in a position shaded from harsh sunlight, especially during the hottest parts of the day.

Temperature and Humidity

Queen Anthurium prefers a temperature range between 68-86°F (20-30°C) to mimic its natural tropical rainforest habitat. It’s essential to maintain a stable temperature, as sudden fluctuations may stress the plant. Maintaining a humidity level of 70% or higher is crucial for this plant. To achieve optimal humidity indoors, try using a humidifier or placing the pot on a tray filled with water and pebbles.

Soil and Potting Mix

A well-draining potting soil is essential for Anthurium warocqueanum to prevent root rot and other issues related to waterlogged soil. Combine 100% either a mixture of orchid bark, perlite, and charcoal or sphagnum moss can be used, peat moss, and potting mix for the best results. This combination facilitates adequate aeration, moisture retention, and drainage needed for the Queen Anthurium.

Regularly check the moisture levels in the soil to ensure proper watering frequency for your plant. On average, watering once a week is sufficient, but adjust based on the environmental conditions and the plant’s needs. Overwatering may cause root rot, so it’s best to let the soil partially dry out between watering sessions.

With the right balance of light, temperature, humidity, and a suitable potting mix, your Anthurium warocqueanum will thrive and showcase its striking dark green velvety leaves.

Watering and Fertilizing

Watering Frequency and Technique

Anthurium Warocqueanum prefers to have consistently moist soil but not overly wet. Watering this plant once a week is usually sufficient to meet its moisture requirements. Make sure to let the top inch or two (around 2-5 cm) of soil dry out slightly before watering again. A balanced technique that follows this principle will allow this beautiful plant to thrive.

When watering, it is important to use a well-draining soil mix. Thoroughly drench the soil until the water comes out from the drainage holes at the bottom of the pot. Be cautious not to let the plant sit in stagnant water, as it can lead to rotting of the roots.

If your Anthurium Warocqueanum is potted in moss, the watering frequency might change slightly. In such cases, you can follow a similar watering schedule of at least once a week, allowing the plant to absorb the moisture in the moss completely before the next watering.

Fertilizer Recommendations

Fertilizing your Anthurium Warocqueanum regularly is vital to its healthy growth and vibrant foliage. It is recommended to use a liquid fertilizer, diluted to 1/4 of its suggested strength, and applied on a weekly basis.

When selecting a suitable fertilizer for your Queen Anthurium, it’s essential to choose a balanced liquid fertilizer. Look for a fertilizer with an NPK (Nitrogen, Phosphorus, Potassium) ratio of around 20-20-20, as this would provide the necessary nutrients for the plant’s growth and overall health.

In conclusion, following proper watering techniques and providing adequate fertilization will significantly impact the successful growth and beauty of your Anthurium Warocqueanum. Keep in mind that the plant has a growing season during spring and summer, and tends to enter dormancy in fall and winter, so adjust the care accordingly. Remember, consistency and moderation are key to maintaining the health and vibrancy of this stunning houseplant.

Pruning and Maintenance

Pruning Techniques

Proper pruning is essential for maintaining the health and appearance of your Anthurium warocqueanum. Start by examining the plant and get rid of any dead or discolored leaves. Remove wilted or dead blossoms by cutting them at the base of the stem. Keep at least three to five leaves in place to maintain the plant’s health. If possible, prioritize removing older leaves first. Regularly pruning your plant ensures proper growth and prevents diseases.

Support and Aeration

Anthurium warocqueanum plants often need support to achieve their full potential. Staking or using a moss pole allows the plant to develop strong roots and have enough room to grow. By providing support, you also ensure good aeration for the roots, essential for the plant’s well-being.

To attach your plant to a support, like a moss pole:

  1. Position the support near the main stem of the plant.
  2. Gently wrap the stem around the support, being careful not to damage the delicate leaves.
  3. Use soft ties or plastic clips to secure the stem to the support, allowing room for growth.

Additionally, be sure to maintain proper aeration for your plant by using well-draining potting soil. A proper mix may include perlite, orchid bark, charcoal, and peat moss. This will ensure that your Anthurium warocqueanum plant receives necessary nutrients and oxygen.

Remember to always handle your Anthurium warocqueanum with care during pruning and maintenance. Implementing these techniques will help ensure your plant’s long-term health and continued growth.

Pests and Diseases

Common Pests

Anthurium Warocqueanum plants may occasionally be affected by various pests, such as aphids, brown scales, thrips, and white mealybugs. To treat these infestations, you can shoot pests off the leaves with water or gently scrub the leaves with a soft brush and horticultural soap. Remember to be gentle when cleaning the leaves, as they are delicate and can easily be damaged.

Disease Prevention

To prevent diseases and maintain a healthy Anthurium Warocqueanum, it is essential to follow good care practices. Here are some key tips:

  • Watering: Make sure not to over-water or let your plant sit in water, as this increases the risk of fungal infections and root rot. Keep the soil moist but not soggy, and let it dry slightly between waterings.
  • Proper Lighting: Provide your plant with bright indirect light to avoid scorching the leaves, which can lead to diseases.
  • Humidity: Maintain a humidity level of 70% or more for optimal growth and to create an environment that discourages pests.
  • Air Circulation: Ensure that your plant has proper air circulation to prevent mold and fungal growth. Keep it away from drafts and other temperature fluctuations.
  • Soil and Potting: Use a well-draining, nutrient-rich potting mix specially designed for aroids like Anthurium Warocqueanum. This helps prevent diseases caused by poor soil conditions.

By following these care tips, you’ll be better equipped to prevent pests and diseases from affecting your Anthurium Warocqueanum, ensuring a thriving and healthy plant.

Propagation Methods


Anthurium Warocqueanum propagation can be experimented with by division. This method involves separating a mature, healthy plant with multiple stems or shoots. Firstly, carefully remove the plant from its pot and gently shake off excess soil, revealing the roots. Divide the plant into sections, making sure each new section has a share of the roots, stems, and leaves. After dividing the plant, repot each new section in its own pot, utilizing loose soil that drains well and retains some moisture.

Some tips for successful division propagation:

  • Choose a healthy, mature plant with multiple stems
  • Be gentle when separating roots and divisions
  • Use loose, well-draining soil that retains slight moisture

Stem Cuttings

Another propagation method for Anthurium Warocqueanum is through stem cuttings. To do this, select a healthy stem with at least one node, preferably two. Cut the stem diagonally, making sure to include the nodes in the cutting. Place the cutting in water or rooting hormone, and once roots develop, transfer the cutting to a well-draining, moisture-retaining soil medium or a suitable epiphytic mix.

Here is a summary of steps for stem cutting propagation:

  1. Choose a healthy stem with at least one node
  2. Make a diagonal cut, including the nodes in the cutting
  3. Place the cutting in water or rooting hormone
  4. Once roots develop, transfer the cutting to a suitable soil medium

Remember that successfully propagating Anthurium Warocqueanum requires patience and attention to the plant’s needs. Whether using the division method or stem cuttings, it is essential to provide the proper soil conditions and care to ensure a thriving and healthy new plant.

Frequently Asked Questions

What causes yellowing leaves?

Yellowing leaves on an Anthurium warocqueanum can be the result of several factors. Overwatering or underwatering, lack of nutrients, or exposure to direct sunlight may cause leaves to turn yellow. Monitor the plant’s environment and watering schedule to ensure proper care and maintain its health.

Which soil mix is best?

A well-draining soil mix is essential for Anthurium warocqueanum. A mix of perlite, orchid bark, charcoal, and peat moss with potting mix is optimal. Ensuring good drainage and aeration in the soil will help maintain the overall health of the plant.

How is propagation done?

Propagation of Anthurium warocqueanum can be done through stem cuttings or division. Cut a healthy stem with at least one leaf and a node, and let the cut dry for a day. Place the cutting in a moist growing medium and maintain high humidity to support root development.

What is the ideal price?

The price of Anthurium warocqueanum plants may vary depending on the size, age, and overall condition. As a rare and sought-after plant, it can be more expensive than other common houseplants. Shop around to find the best price for a healthy specimen.

What’s the dark form?

The dark form of Anthurium warocqueanum is a variation that features dark green, almost black leaves with prominent venation. This striking form adds a unique and dramatic touch to any plant collection. Care requirements for the dark form are similar to other Anthurium warocqueanum plants.

Where to buy seeds?

Finding seeds for Anthurium warocqueanum can be challenging, as they are rarely available. Instead, consider purchasing a cutting or established plant from reputable plant sellers, online shops, or specialized nurseries. It’s essential to buy from trusted sources to ensure the plant’s health and authenticity.

Helpful Video